macocha/artichoke-klipper-backup
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

print_start.cfg modified - 07/14/2025 - 10:02:20 PM

Browse source
This commit is contained in:
macocha 2025-07-14 22:02:23 +00:00
parent bf44ea5ce0
commit 5c9ed3f290
1 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

14
printer_data/config/macros/print_start.cfg
View file

@ -8,6 +8,13 @@ gcode:
RESPOND PREFIX="PRINT_START: " MSG="Preparing printer..."
# Home the printer, set absolute positioning and update the Stealthburner LEDs.
BED_MESH_CLEAR # Clear old saved bed mesh (if any)
RESPOND PREFIX="PRINT_START: " MSG="Homing all axes"
LEDS_STATUS_HOMING # Set LEDs to homing-mode
G28 # Full home (XYZ)
G90 # Absolute position
# Check if the bed temp is higher than 90c - if so then trigger a heatsoak.
{% if target_bed > 90 %}
RESPOND PREFIX="PRINT_START: " MSG="Heating bed to: {target_bed}c"
@ -38,13 +45,6 @@ gcode:
LEDS_STATUS_HEATING # Set LEDs to heating-mode
M109 S140 # Heat hotend to 140c
# Home the printer, set absolute positioning and update the Stealthburner LEDs.
BED_MESH_CLEAR # Clear old saved bed mesh (if any)
RESPOND PREFIX="PRINT_START: " MSG="Homing all axes"
LEDS_STATUS_HOMING # Set LEDs to homing-mode
G28 # Full home (XYZ)
G90 # Absolute position
RESPOND PREFIX="PRINT_START: " MSG="Performing QGL"
LEDS_STATUS_LEVELING # Set LEDs to leveling-mode
QUAD_GANTRY_LEVEL # Level the printer via QGL