diff --git a/printer_data/config/macros/fan_tach_monitor.cfg b/printer_data/config/macros/fan_tach_monitor.cfg
index 51f95a0..29f05d8 100644
--- a/printer_data/config/macros/fan_tach_monitor.cfg
+++ b/printer_data/config/macros/fan_tach_monitor.cfg
@@ -19,7 +19,7 @@ gcode:
 
     {% if (he_target >= fan_on_temp) and (rpm < min_rpm) and (he_temp >= fan_on_temp) %}
         SET_GCODE_VARIABLE MACRO=HOTEND_FAN_CHECK VARIABLE=he_stop_count VALUE={he_stop_count + 1}
-        RESPOND PREFIX="HOTEND FAN CHECK:" MSG="Fan stoppage detected ({he_stop_count+1}/{max_consecutive_stops})."
+        RESPOND PREFIX="HOTEND FAN CHECK:" MSG="Hotend fan stoppage detected ({he_stop_count+1}/{max_consecutive_stops})."
         {% if printer["gcode_macro HOTEND_FAN_CHECK"].he_stop_count|int >= max_consecutive_stops-1 %}
             M400
             FAN_STOPPAGE_ROUTINE
@@ -35,7 +35,7 @@ gcode:
     # If not already paused
     {% if printer['pause_resume'].is_paused|int == 0 %}
         M117 !!FAN STOPPAGE!!
-        M118 FAN STOPPAGE DETECTED. PAUSING...
+        RESPOND PREFIX="FAN CHECK:" MSG="Fan stoppage detected. Pausing print."
         PAUSE
         # Turn off the hotend. 
         # !! Don't forget to turn your hotend back on before resume. !!