macocha/artichoke-klipper-backup
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

printer.cfg modified - 07/06/2025 - 01:09:19 PM

Browse source
This commit is contained in:
macocha 2025-07-06 13:09:22 +00:00
parent e67981b1b4
commit f88a796a2f
1 changed files with 15 additions and 20 deletions
Download patch file Download diff file Expand all files Collapse all files

35
printer_data/config/printer.cfg
View file

@ -1,5 +1,8 @@
[include mainsail.cfg] [include mainsail.cfg]
[include macros/print_start.cfg] [include macros/print_start.cfg]
[include macros/stealtburner_leds.cfg]
[include macros/status.cfg]
[virtual_sdcard] [virtual_sdcard]
path: /home/macocha/printer_data/gcodes path: /home/macocha/printer_data/gcodes
@ -196,7 +199,7 @@ spi_software_miso_pin: EBBCan:gpio3
axes_map: z,-y,x axes_map: z,-y,x
[resonance_tester] [resonance_tester]
probe_points: 100, 100, 20 probe_points: 175, 175, 20
accel_chip: adxl345 accel_chip: adxl345
[neopixel sb_leds] [neopixel sb_leds]
@ -282,16 +285,6 @@ stealthchop_threshold: 0
##################################################################### #####################################################################
# Fan Control # Fan Control
##################################################################### #####################################################################
# [fan]
# ## Print Cooling Fan - CNC_FAN0
# pin: PF7
# kick_start_time: 0.5
# ## Depending on your fan, you may need to increase this value
# ## if your fan will not start. Can change cycle_time (increase)
# ## if your fan is not able to slow down effectively
# off_below: 0.10
[fan] [fan]
pin: EBBCan:gpio13 pin: EBBCan:gpio13
@ -357,6 +350,17 @@ retries: 5
retry_tolerance: 0.0075 retry_tolerance: 0.0075
max_adjust: 10 max_adjust: 10
[bed_mesh]
speed: 300
horizontal_move_z: 10
mesh_min: 40, 40
mesh_max: 310,310
fade_start: 0.6
fade_end: 10.0
probe_count: 5,5
algorithm: bicubic
[board_pins] [board_pins]
aliases: aliases:
# EXP1 header # EXP1 header
@ -373,15 +377,6 @@ aliases:
EXP2_7=PE8, EXP2_8=<RST>, EXP2_7=PE8, EXP2_8=<RST>,
EXP2_9=<GND>, EXP2_10=<NC> EXP2_9=<GND>, EXP2_10=<NC>
[bed_mesh]
speed: 300
horizontal_move_z: 10
mesh_min: 40, 40
mesh_max: 310,310
fade_start: 0.6
fade_end: 10.0
probe_count: 5,5
algorithm: bicubic
##################################################################### #####################################################################