448 lines
9.8 KiB
INI
448 lines
9.8 KiB
INI
[include mainsail.cfg]
|
|
[include macros/print_start.cfg]
|
|
|
|
[virtual_sdcard]
|
|
path: /home/macocha/printer_data/gcodes
|
|
on_error_gcode: CANCEL_PRINT
|
|
|
|
[exclude_object]
|
|
|
|
[mcu]
|
|
canbus_uuid: 5079b671fcdd
|
|
|
|
[printer]
|
|
kinematics: corexy
|
|
max_velocity: 300
|
|
max_accel: 3000 #Max 4000
|
|
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
|
|
max_z_accel: 350
|
|
square_corner_velocity: 5.0
|
|
|
|
[temperature_sensor MCU]
|
|
sensor_type: temperature_mcu
|
|
|
|
[temperature_sensor SoC]
|
|
sensor_type: temperature_host
|
|
|
|
#####################################################################
|
|
# X/Y Stepper Settings
|
|
#####################################################################
|
|
|
|
[stepper_x]
|
|
step_pin: PE6
|
|
dir_pin: PE5
|
|
enable_pin: !PC14
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
full_steps_per_rotation:200
|
|
endstop_pin: ^EBBCan:gpio24
|
|
position_min: 0
|
|
position_endstop: 350
|
|
position_max: 350
|
|
homing_speed: 25 #Max 100
|
|
homing_retract_dist: 5
|
|
homing_positive_dir: true
|
|
|
|
[tmc2209 stepper_x]
|
|
uart_pin: PC13
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
|
|
[stepper_y]
|
|
step_pin: PE2
|
|
dir_pin: PE1
|
|
enable_pin: !PE4
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: ^PF3
|
|
full_steps_per_rotation:200
|
|
position_min: 0
|
|
position_endstop: 350
|
|
position_max: 350
|
|
homing_speed: 25 #Max 100
|
|
homing_retract_dist: 5
|
|
homing_positive_dir: true
|
|
|
|
[tmc2209 stepper_y]
|
|
uart_pin: PE3
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
#####################################################################
|
|
# Z Stepper Settings
|
|
#####################################################################
|
|
|
|
## Z0 Stepper - Front Left on MOTOR3_A
|
|
[stepper_z]
|
|
step_pin: PB8
|
|
dir_pin: PB7
|
|
enable_pin: !PE0
|
|
rotation_distance: 40
|
|
gear_ratio: 80:16
|
|
microsteps: 16
|
|
endstop_pin: probe:z_virtual_endstop
|
|
position_max: 340
|
|
position_min: -5
|
|
homing_speed: 8
|
|
second_homing_speed: 3
|
|
homing_retract_dist: 3
|
|
|
|
[tmc2209 stepper_z]
|
|
uart_pin: PB9
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
[stepper_z1]
|
|
step_pin: PG13
|
|
dir_pin: !PG12
|
|
enable_pin: !PG15
|
|
rotation_distance: 40
|
|
gear_ratio: 80:16
|
|
microsteps: 16
|
|
|
|
[tmc2209 stepper_z1]
|
|
uart_pin: PG14
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
[stepper_z2]
|
|
step_pin: PG9
|
|
dir_pin: PD7
|
|
enable_pin: !PG11
|
|
rotation_distance: 40
|
|
gear_ratio: 80:16
|
|
microsteps: 16
|
|
|
|
[tmc2209 stepper_z2]
|
|
uart_pin: PG10
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
[stepper_z3]
|
|
step_pin: PD4
|
|
dir_pin: !PD3
|
|
enable_pin: !PD6
|
|
rotation_distance: 40
|
|
gear_ratio: 80:16
|
|
microsteps: 16
|
|
|
|
[tmc2209 stepper_z3]
|
|
uart_pin: PD5
|
|
interpolate: true
|
|
run_current: 0.8
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
|
|
# Steppers Autotune
|
|
[autotune_tmc stepper_x]
|
|
motor: moons-ms17hd6p420I-05
|
|
[autotune_tmc stepper_y]
|
|
motor: moons-ms17hd6p420I-05
|
|
|
|
[autotune_tmc stepper_z]
|
|
motor: moons-ms17hd6p420I-05
|
|
[autotune_tmc stepper_z1]
|
|
motor: moons-ms17hd6p420I-05
|
|
[autotune_tmc stepper_z2]
|
|
motor: moons-ms17hd6p420I-05
|
|
[autotune_tmc stepper_z3]
|
|
motor: moons-ms17hd6p420I-05
|
|
|
|
[autotune_tmc extruder]
|
|
motor: moons-cse14hra1l410a
|
|
|
|
|
|
|
|
#####################################################################
|
|
# Bed Heater
|
|
#####################################################################
|
|
|
|
[heater_bed]
|
|
heater_pin: PA1
|
|
sensor_type: Generic 3950
|
|
sensor_pin: PB1
|
|
max_power: 1.0
|
|
min_temp: 0
|
|
max_temp: 120
|
|
|
|
|
|
#####################################################################
|
|
# Toolhead
|
|
#####################################################################
|
|
[mcu EBBCan]
|
|
canbus_uuid: 92dc26a3e9fc
|
|
|
|
[temperature_sensor EBB_NTC]
|
|
sensor_type: Generic 3950
|
|
sensor_pin: EBBCan:gpio28
|
|
|
|
[adxl345]
|
|
cs_pin: EBBCan:gpio1
|
|
spi_software_sclk_pin: EBBCan:gpio2
|
|
spi_software_mosi_pin: EBBCan:gpio0
|
|
spi_software_miso_pin: EBBCan:gpio3
|
|
axes_map: z,-y,x
|
|
|
|
[resonance_tester]
|
|
probe_points: 100, 100, 20
|
|
accel_chip: adxl345
|
|
|
|
[neopixel hotend_rgb]
|
|
pin: EBBCan:gpio16
|
|
chain_count: 3
|
|
color_order: GRBW
|
|
|
|
[probe]
|
|
pin: ^EBBCan:gpio22
|
|
x_offset: 0
|
|
y_offset: 0
|
|
activate_gcode:
|
|
{% set PROBE_TEMP = 150 %}
|
|
{% set MAX_TEMP = PROBE_TEMP + 5 %}
|
|
{% set ACTUAL_TEMP = printer.extruder.temperature %}
|
|
{% set TARGET_TEMP = printer.extruder.target %}
|
|
|
|
{% if TARGET_TEMP > PROBE_TEMP %}
|
|
{ action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
|
|
M109 S{ PROBE_TEMP }
|
|
{% else %}
|
|
# Temperature target is already low enough, but nozzle may still be too hot.
|
|
{% if ACTUAL_TEMP > MAX_TEMP %}
|
|
{ action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
|
|
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
|
|
{% endif %}
|
|
{% endif %}
|
|
# z_offset: 0
|
|
speed: 10.0
|
|
samples: 3
|
|
samples_result: median
|
|
sample_retract_dist: 3.0
|
|
samples_tolerance: 0.006
|
|
samples_tolerance_retries: 3
|
|
|
|
|
|
|
|
# #####################################################################
|
|
# # Extruder
|
|
# #####################################################################
|
|
[extruder]
|
|
step_pin: EBBCan:gpio18
|
|
dir_pin: EBBCan:gpio19
|
|
enable_pin: !EBBCan:gpio17
|
|
rotation_distance: 22.6789511
|
|
gear_ratio: 50:10
|
|
microsteps: 16
|
|
full_steps_per_rotation: 200
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.75
|
|
heater_pin: EBBCan:gpio7
|
|
max_power: 1.0
|
|
min_extrude_temp: 170
|
|
pressure_advance: 0.05
|
|
pressure_advance_smooth_time: 0.040
|
|
max_extrude_only_distance: 101 # for calibration
|
|
|
|
min_temp: 10
|
|
max_temp: 270
|
|
sensor_type: MAX31865
|
|
sensor_pin: EBBCan:gpio9
|
|
spi_software_sclk_pin: EBBCan:gpio10
|
|
spi_software_mosi_pin: EBBCan:gpio8
|
|
spi_software_miso_pin: EBBCan:gpio11
|
|
rtd_nominal_r: 100
|
|
rtd_reference_r: 430
|
|
rtd_num_of_wires: 2
|
|
|
|
[tmc2209 extruder]
|
|
uart_pin: EBBCan:gpio20
|
|
interpolate: true
|
|
run_current: 0.5
|
|
sense_resistor: 0.110
|
|
stealthchop_threshold: 0
|
|
|
|
|
|
|
|
#####################################################################
|
|
# Fan Control
|
|
#####################################################################
|
|
|
|
# [fan]
|
|
# ## Print Cooling Fan - CNC_FAN0
|
|
# pin: PF7
|
|
# kick_start_time: 0.5
|
|
# ## Depending on your fan, you may need to increase this value
|
|
# ## if your fan will not start. Can change cycle_time (increase)
|
|
# ## if your fan is not able to slow down effectively
|
|
# off_below: 0.10
|
|
|
|
[fan]
|
|
pin: EBBCan:gpio13
|
|
|
|
[heater_fan hotend_fan]
|
|
pin: EBBCan:gpio15
|
|
tachometer_pin: EBBCan:gpio12
|
|
heater: extruder
|
|
heater_temp: 50.0
|
|
|
|
[controller_fan electronics_fan]
|
|
pin: PA6
|
|
tachometer_pin: PC2
|
|
heater:
|
|
stepper: stepper_x,stepper_y,stepper_z,stepper_z1,stepper_z2,stepper_z3
|
|
|
|
#[heater_fan exhaust_fan]
|
|
## Exhaust fan - CNC_FAN3
|
|
#pin: PF8
|
|
#max_power: 1.0
|
|
#shutdown_speed: 0.0
|
|
#kick_start_time: 5.0
|
|
#heater: heater_bed
|
|
#heater_temp: 60
|
|
#fan_speed: 1.0
|
|
|
|
#####################################################################
|
|
# LED Control
|
|
#####################################################################
|
|
|
|
#[output_pin caselight]
|
|
# Chamber Lighting - HE2 Connector (Optional)
|
|
#pin: PA3
|
|
#pwm:true
|
|
#shutdown_value: 0
|
|
#value:1
|
|
#cycle_time: 0.01
|
|
|
|
|
|
#####################################################################
|
|
# Homing and Gantry Adjustment Routines
|
|
#####################################################################
|
|
|
|
[idle_timeout]
|
|
timeout: 1800
|
|
|
|
[safe_z_home]
|
|
home_xy_position:175,175
|
|
speed:100
|
|
z_hop:10
|
|
|
|
[quad_gantry_level]
|
|
gantry_corners:
|
|
-60,-10
|
|
410,420
|
|
points:
|
|
50,25
|
|
50,275
|
|
300,275
|
|
300,25
|
|
speed: 100
|
|
horizontal_move_z: 10
|
|
retries: 5
|
|
retry_tolerance: 0.0075
|
|
max_adjust: 10
|
|
|
|
[board_pins]
|
|
aliases:
|
|
# EXP1 header
|
|
EXP1_1=PE7, EXP1_2=PG1,
|
|
EXP1_3=PG0, EXP1_4=PF15,
|
|
EXP1_5=PF14, EXP1_6=PF13, # Slot in the socket on this side
|
|
EXP1_7=PF12, EXP1_8=PF11,
|
|
EXP1_9=<GND>, EXP1_10=<5V>,
|
|
|
|
# EXP2 header
|
|
EXP2_1=PE13, EXP2_2=PE12,
|
|
EXP2_3=PE15, EXP2_4=PE11,
|
|
EXP2_5=PE10, EXP2_6=PE14, # Slot in the socket on this side
|
|
EXP2_7=PE8, EXP2_8=<RST>,
|
|
EXP2_9=<GND>, EXP2_10=<NC>
|
|
|
|
[bed_mesh]
|
|
speed: 300
|
|
horizontal_move_z: 10
|
|
mesh_min: 40, 40
|
|
mesh_max: 310,310
|
|
fade_start: 0.6
|
|
fade_end: 10.0
|
|
probe_count: 5,5
|
|
algorithm: bicubic
|
|
|
|
|
|
#####################################################################
|
|
# Macros
|
|
#####################################################################
|
|
|
|
[gcode_macro G32]
|
|
gcode:
|
|
BED_MESH_CLEAR
|
|
G28
|
|
QUAD_GANTRY_LEVEL
|
|
G28
|
|
G0 X175 Y175 Z30 F3600
|
|
|
|
[gcode_macro PRINT_END]
|
|
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
|
|
gcode:
|
|
SAVE_GCODE_STATE NAME=STATE_PRINT_END
|
|
|
|
M400 ; wait for buffer to clear
|
|
G92 E0 ; zero the extruder
|
|
G1 E-10.0 F3600 ; retract filament
|
|
|
|
G91 ; relative positioning
|
|
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
|
|
TURN_OFF_HEATERS
|
|
M107 ; turn off fan
|
|
G1 Z2 F3000 ; move nozzle up 2mm
|
|
G90 ; absolute positioning
|
|
G0 X125 Y250 F3600 ; park nozzle at rear
|
|
BED_MESH_CLEAR
|
|
|
|
# The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
|
|
# command pair is to restore the printer's coordinate system
|
|
# and speed settings since the commands above change them.
|
|
# However, to prevent any accidental, unintentional toolhead
|
|
# moves when restoring the state, explicitly set MOVE=0.
|
|
RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
|
|
|
|
# SHAKE TUNE CFG
|
|
[shaketune]
|
|
result_folder: ~/shaketune_results
|
|
show_macros_in_webui: false
|
|
|
|
[input_shaper]
|
|
shaper_freq_x: 44.6
|
|
shaper_type_x: mzv
|
|
damping_ratio_x: 0.051
|
|
shaper_freq_y: 34.8
|
|
shaper_type_y: mzv
|
|
damping_ratio_y: 0.066
|
|
|
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
|
#*#
|
|
#*# [heater_bed]
|
|
#*# control = pid
|
|
#*# pid_kp = 56.947
|
|
#*# pid_ki = 2.287
|
|
#*# pid_kd = 354.497
|
|
#*#
|
|
#*# [extruder]
|
|
#*# control = pid
|
|
#*# pid_kp = 20.003
|
|
#*# pid_ki = 1.102
|
|
#*# pid_kd = 90.759
|
|
#*#
|
|
#*# [probe]
|
|
#*# z_offset = -1.475
|